Philips FC8778 Bedienungsanleitung Seite 11

English
14
Using your robot
Preparing the room for a cleaning run
Functions of the start/stop button
How you press start/stop button
Press start/stop button for 1 second
Press start/stop button briefly
Press start/stop button for 3 seconds
Press start/stop button for 10 seconds
Press start/stop button for 20 seconds
User interface signals and their meaning
Signal Description of signal
The start/stop button is on continuously.
The start/stop button flashes slowly.
Before you start the robot on its cleaning run, make sure that you remove all
loose and fragile objects from the floor.
Also remove all cables, wires and cords from the floor.
The start/stop button has 5 functions:
1 sec.
1 x
10 sec.
3 sec.
20 sec.
How robot responds
Robot switches from sleep mode to standby
Robot starts or stops cleaning
Switches robot on or off.
Activates WiFi setup and user interface on robot.
Resets WiFi connection. You hear two long beeps.
Activates WiFi setup and user interface.
The robot has a display with two indicators: a warning indicator and the WiFi
connection indicator. The start/stop button gives light signals. The table
below explains the meaning of the signals.
Meaning of signal
The robot is ready to clean.
The robot is charging.