Technical Data; Information On The Type Plate; Tightening Torque - Daikin Altherma 3 H HT ECH2 O Referenzhandbuch Für Den Monteur

9

Technical data

9 Technical data
Part of the current technical data is available on the regional Daikin-
website (publicly accessible). The complete technical data is avail-
able via the Daikin Business Portal (authentication required).
9.1

Information on the type plate

Fig. 9-1 Type plate
1 Device type
2 Empty weight
3 Total filled weight
4 Max. permissible operating pressure PMS (heating)
5 Total storage capacity
6 Max. permissible operating temperature T
7 Standby heat expenditure in 24 hours at 60 °C (storage
tank) Q
st
Installer reference guide
52
9.2
Temperature sensor
Hydraulic line connections (wa-
ter)
Backup heater
Tab. 9-1
max
8 Operating pressure of storage water pH
9 Nominal capacity of drinking water
10 Max. operating pressure PMW (plumbing)
11 Nominal voltage U
12 Protection type
13 Electrical power consumption elmax
14 Backup-heater (optional)
15 Backup heater protection class (optional)
16 Backup heater fuse (optional)
17 Output/backup heater power supply (optional)
18 Serial number (specify in the event of complaints or inquir-
ies)
19 Date of production

Tightening torque

Component Thread size
All
1"
1.5"
Tightening torques
Daikin Altherma ETS(X/H)(B)-D
Heat pump (indoor unit) with integrated heat accumulator
008.1447299_00 – 06/2019 – EN
O
2
Tightening
torque in Nm
Max. 10
25 – 30
Max. 10
(handtight)