General Operation; Receiving; Volume Control; Monitor Function - DNT Space200 Bedienungsanleitung

General operation

Receiving

If the radio is turned on, it is automatically set into receiving mode.
To communicate with other two-way radios all radios must
have the same channel.

Volume control

The volume can be adjusted in 8 steps.
To change the volume proceed as follows:
Press the Up-/Down button to change the volume.
The display shows the current volume level.

Monitor function

With the monitor function you can switch off the automatic squelch to
listen to the weakest signals, which are cut from the automatic squelch.
To activate the monitor press Menu button 3 times. A noise of weak sig-
nals is heard. To switch off the monitor function press Menu button once
again.

Channel selection

The Space200 offers 8 channels in the PMR band.
To change the channel proceed as follows:
Press the Menu button once, the channel no. fl ashes on the display.
Use the Up-/Down button to select the channel.
Press the PTT button to confi rm or wait 3 seconds, the changes are
stored automatically.

Channel scan

Busy channels can be automatically scanned.
- 24 -