Turn The Radio On; Turn The Radio Off; Transmitting; Call-Ring Tone - DNT Space200 Bedienungsanleitung

Turn the radio on

To switch the radio on, press the On/Off button for 2 seconds until the dis-
play appears and a tone is heard. After half a second the display changes
to normal mode.

Turn the radio off

To switch the radio off, press the On/Off button for 2 seconds, until the
display shows of and then turns off.
General
All settings made in the Menu are stored and the radio
returns to standard mode if no button is pressed within 3
seconds.
Don't touch the antenna during transmission, to avoid mal-
function of the radio.

Transmitting

To transmit, press and hold the PTT (PUSH-TO-TALK) button and speak
with a normal voice from a distance of 5-8 cm away from the microphone.
The TX icon is on while transmitting. Release the PTT button at the end
of transmission.

Call-Ring tone

You can use call tones to get the attention of other people with radios on
the same channel.
Press CALL button, the LCD displays TX icon and your call tone will
be transmitted to nearby receivers set on the same channel.
Getting started
- 23 -