Operational Summary - Nikon Forestry Pro Bedienungsanleitung

Operational Summary

En
7. Switching Target priority modes (Factory default setting is
De
Distant Target Priority mode.)
Fr
First Target Priority
[ ]
Es
1. LCD panel should be on.
It
2. Press and hold
Ru
button within 0.5 second.
No
Note） I f the
second, the display unit (m/yd/ft) will be switched.
Se
3. Continue to press and hold both buttons (more than 2
Fi
seconds) until First Target Priority mode and Distant Target
Priority mode are switched.
Nl
Note: If buttons are not pressed in the correct order,
switching will not take place.
Dk
Note: If switching fails to take place, repeat 2.
Ro
4. Release buttons.
Note: Because Target Priority mode is not displayed
Pl
while Angle mode is set, switching is made but
Hu
visual confirmation is impossible. Switch to another
measuring mode for confirmation.
Cz
[Deciding which Target Priority to use]
When obtaining different results from a single measuring
operation, the Nikon Laser Forestry Pro will display the distance
to the farthest target on the LCD panel when using Distant Target
Priority mode, while First Target Priority mode will show the range
to the nearest target.
ex.) When measuring a tree standing in front of a house;
Distance to Target
"115m" (distance to the tree) will be displayed in First Target
Priority mode, and "128m" (distance to the house) in Distant
Target Priority mode. First Target Priority mode, for example, has
applications for golf, while Distant Target Priority is useful when
16
Distant Target Priority
[ ]
button, then depress and hold
button is not pressed within 0.5
Tree Fence House
115m 123m 128m
hunting in heavily wooded areas.
8. Low battery indication
Flashing indicates that the battery power is low and
battery should be replaced. (See "Changing Battery")