Storch VacTec 30 M Bedienungsanleitung Seite 116

Working with electrical power tools
DANGER
Risk of injury and damage! The socket
outlet is only for the connection of
power tools to the vacuum cleaner.
Any other use of the socket outlet is
not permitted.
Connect the mains plug of the electric
power tool to the vacuum cleaner.
The vacuum cleaner is in standby
mode.
Switch on the appliance at the rota-
ting knob.
NOTE
The vacuum cleaner is turned on and
off automatically with the electric
power tool.
NOTE
The vacuum cleaner starts automati-
cally within 0.5 seconds and continu-
es to run for 15 seconds after the
power tool has being switched off.
NOTE
Please refer to „Technical specifica-
tions" for the power connection speci-
fications of the power tools.
Translation of the original instruction
I
Remove the elbow from the suction
hose.
Attach the tool adapter to the suction
hose.
Connect the tool adapter to the
electric power tool.
NOTE
The different suction hose sections
are required to allow an adjustment
to the connection sections of the pro-
cessing tools.
Set the minimum volume flow for
the suction hose cross section at the
rotary switch.
The scale displays the suction hose
cross section.
NOTE
To use the appliance as dedusting
device for the mobile operation (pro-
cessing tool connected to the vacuum
cleaner) the built-in monitoring must
be adjusted to the connected proces-
116