Safety Devices; Start Up - Storch VacTec 30 M Bedienungsanleitung

Safety Devices

Monitoring of the flat fold filter
If the device is operated without a
flat fold filter, it automatically swit-
ches off.

Start up

The appliance allows 2 operating
modes:
1. Industry vacuum cleaner mode
(socket not used)
2. Dedusting mode (socket used)
Connect the suction hose and insert
the suction nozzle or connect to the
dustgenerating device depending on
the operating mode.
WARNING
The flat pleated filter must always be
in place while vacuuming.
WARNING
Do not vacuum without the filter ele-
ments; otherwise, the suction motor
can get damaged and this can be
hazardous to health on account of
increased release of fine dust parti-
cles.
Horn
Interval tone
The horn blows (interval tone) when
the air speed falls below 20 m/s.
Translation of the original instruction
NOTE
The horn reacts to negative pressure.
Set the rotary switch to the correct
suction hose cross-section.
Permanent tone
The horn blows (permanent tone)
when the cooling air filter is clogged.
Allow appliance to cool down. Clean /
replace the cooling air filter.
Anti-static system
Static charge is deflected by providing
earthing to the connection nozzles.
This prevents the formation of sparks
and current shocks with attachments
with electrical conductivity (included
in the delivery).
Dry vacuum cleaning
NOTE
You can use this appliance to take up
all types of dust up to dust class M. It
is statutorily necessary to use a dust
collection bag (see Filter systems for
order number).
NOTE
The appliance is suited as industri-
al vacuum cleaner and as dedusting
112