Maintenance; Troubleshooting; Technical Data - OHAUS Defender 3000 Sicherheitsinformationen

EN-2
2.3 Levelling the Instrument
To level the instrument, adjust the feet so the bubble is centered in the circle of the level indicator. Be sure the equipment is
level each time its location is changed.

3. MAINTENANCE

3.1 Cleaning
WARNING: Electric Shock Hazard. Disconnect the equipment from the power supply before cleaning.
Make sure that no liquid enters the interior of the instrument.
Attention: Do not use solvents, harsh chemicals, ammonia or abrasive cleaning agents.
The exterior surfaces of the instrument may be cleaned with a cloth dampened with water and a mild detergent.

3.2 Troubleshooting

For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.

4. TECHNICAL DATA

The technical data is valid under the following conditions:
Ambient temperature: –10º C to +40 º C
Relative humidity: 10% to 90% relative humidity, non-condensing
Height above sea level: Up to 4,000m
Specifications:
MODEL
Capacity
Maximum Resolution
Repeatability (std. deviation)
Linearity
Load Cell Excitation
Load Cell Rated Output
MODEL
Capacity
Maximum Resolution
Load Cell Capacity
Repeatability (std. deviation)
Linearity
Load Cell Type
Load Cell Excitation
Load Cell Rated Output
5.COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU (NAWI).
The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment. For
disposal instructions in Europe, refer to www.ohaus.com/weee.
.
D30BR D60BR
30 kg 60 kg
6000d 6000d
D30VR D60VR
30 kg 60 kg
6000d 6000d
50 kg 100 kg
Defender 3000 Series Base
D60BL D150BL
60 kg 150 kg
6000d 7500d
1d
± 1d
5-15V DC/AC
2mV/V
D60VL D150VL
60 kg 150 kg
6000d 7500d
150 kg 300 kg
1d
± 1d
350 Ohm, stainless steel, single point
5-15V DC/AC
2mV/V
D150BX D300BX
150 kg 300 kg
7500d 6000d
D150VX D300VX
150 kg 300 kg
7500d 6000d
300 kg 500 kg