Charging Mobile Devices With The Power Bank - Silvercrest SPBL 8000 A2 Bedienungs- Und Sicherheitshinweise

Charging mobile devices with
the power bank
Use provided USB cable or other charging
6
cable purchased from reliable supplier. Connect
USB Type A port to USB output of the power
3
bank .
5
And then connect USB cable micro-USB port
6
to device to be charged. The charging process
will start automatically.
In case if the charging process does not begin
immediately, press the ON / OFF switch
1
lightly to begin the charging process. The current
battery status of the power bank is shown
5
during the charging process by the LED indica-
tor .
2
To end the charging process, separate the USB
charging cable from the mobile device and the
power bank or the charging process can be
5
interrupted by pressing the ON / OFF key
1
quickly twice. The LED indicator will switch
2
off after approx. 30 seconds.
GB/MT 83