Symbols On The Product - Husqvarna K1270 II R Bedienungsanweisung

7. Information and warning decal
8. Air filter cover
9. Start instruction decal
10. Choke control
11. Throttle lockout
12. Throttle trigger
13. Air purge bulb
14. Stop switch
15. Air intake
16. Starter rope handle
17. Starter housing
18. Type plate
19. Combination wrench

Symbols on the product

WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 4 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden, rapid
and violent and can cause life threatening
injuries. Read and understand the
instructions in the manual before using the
product.
Sparks from the cutting blade can cause fire
in fuel, wood, clothes, dry grass or other
flammable materials.
Make sure that the cutting blade does not
have cracks or other damages.
Do not use circular saw blades.
1390 - 001 - 10.01.2020
Personal protective
Choke
Air purge bulb
Decompression valve
Starter rope handle
Use a fuel mixture of gasoline and oil.
Note: Other symbols/decals on the product refer to
special certification requirements for some markets.
Start instructions decal
To start the product with a cold engine on page
Refer to
8 and To start the product with a warm engine on
page 10 for instructions.
Type plate
XXXXXXXXX YYYY
s / n YYYY WWXXXXX
XXX XX XX-XX
Husqvarna AB
Huskvarna, SWEDEN
XXXXXXXXXXX
XXXXXXXXXXXX
3