Product Overview; Symbols On The Product - Husqvarna K 4000 Bedienungsanweisung

Product overview

1. Rear handle
2. Blade guard
3. Water kit
4. Cutting blade (not supplied)
5. Locking the axle
6. Front handle
7. Inspection cover
8. Power switch lock
9. Power switch
10. Water tap with flow limiter
11. Water connector
12. Rating plate
13. Brush retainer
14. Carbon brushes
15. Residual-current device (not for UK and Irland)
16. Combination spanner
17. Vac attachment (accessory, not supplied)
18. Splash guard
19. Operator's manual
397 - 001 -

Symbols on the product

WARNING! The product can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the product.
Wear personal protective equipment. See
Personal protective equipment on page 7
for instructions.
This product is in accordance with
applicable EC directives.
3