Symbol LS 32XXER Serie Kurzübersicht Seite 4

2
Scanning Made Easy
The scanner should have already been installed and
programmed. If not, consult the Product Reference Guide.. If you
need assistance, contact your local supplier or Symbol
Technologies.
Ready
Before you use the scanner, make sure all cable connections are
secure.
Test
Aim the scanner away from you. Press the trigger; the scan beam
lights and the SCAN light on the back of the unit turns on.
Scan
Make sure the bar code is in the correct scanning range. Aim and
press the trigger. The scanner has read the symbol when:
• You hear a beep.
• The green DECODE light appears.
• The laser turns off.
Quick Reference