Bosch PDA 240 E Bedienungsanleitung Seite 8

Tool Specifications
Delta Sander
Order number
Rated power
Output power
No-load speed
No-load oscillations
rate
Sanding plate size
(corner to corner)
Orbit diameter
Weight (without
accessories), approx. [kg]
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of
the product is 80 dB (A).
The noise level when working can exceed
85 dB (A).
Wear hearing protection!
The typically weighted acceleration is 3 m/s
Machine Elements
1 Vacuum hose*
2 Vacuum connection
3 Thumb wheel for oscillating rate selection
4 On/Off switch
5 SDS slider
6 Sanding plate
7 Sanding sheet (standard)*
8 Detail-sanding attachment*
9 Sanding sheet for attachment tongue*
10 Velcro backing for sanding tongue*
11 Sanding tongue (flat)*
12 Sanding tongue (oval)*
* Not all of the accessories illustrated or described are
included as standard delivery.
8 • 2 609 932 207 • TMS • 17.10.02
PDA 240 E
0 603 346 7..
[W] 240
[W] 95
[rpm] 6 500 – 8 500
[rpm] 13 000 – 17 000
[mm] 93
[mm] 2
1.1
/ II
2
.
English - 1
Intended Use
The machine is intended for dry sanding and pol-
ishing of wood, plastic, metal, filler as well as
coated surfaces. It is particularly suitable for pro-
files, corners or hard-to-reach areas.
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served.
Wear protective glasses and hearing protec-
tion.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
Always direct the cable to the rear away from
the machine.
Insert the mains plug only when the machine is
switched off.
The machine can be used only for dry sanding.
Do not work with materials containing asbes-
tos.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.