Chapter V Running; Steps To Start It - Stiga Rc 685 Gebrauchsanweisung

8. Adjustment of front wheel
1) Adjust front wheel of tiller to the state shown in Fig. 15 when it is going to drive on the road.
2) Adjust the front wheel of tiller to the state shown in Fig.16 when it is going to till the field.
Figure 15 Figure 16

Chapter V Running

(1) Steps to start it

Warning! Before starting the engine, gear shift lever must be put in the neutral position. Clutch lever
shall be released.
2. Put the choke lever to the CLOSE position.
3. Turn the accelerator valve regulator lever slightly to the direction for high speed
minimum
9