Chapter Ii Safety Symbols; Chapter Iii Brief Introduction Of; Major Technical Parameters - Stiga Rc 685 Gebrauchsanweisung

The following symbols are to remind you that if you don't pay attention, you might be severely
injured. Please carefully read the symbols in the manual and notices about safety.
If these symbols peel off or are illegible, please contact the distributor to replace such symbols.
The example of the Declaration of Conformity is provided on the penultimate page of the manual.

(1) Major technical parameters

Nominal power
Nominal speed
Starting
Weight
Tilling width
Tilling depth
Working speed
Transmission
Rotate speed
Vibration:
Left handle
Right handle

Chapter II Safety symbols

.
Chapter III Brief introduction of tiller
3
3.5 kw
3300 giri/min
Recoil start
62.5 kg
85 cm
≥10 cm
0.1 m/s~ 0.3 m/s
With gear in oil bath
120 giri/min
3,67 m/s
2
4,53 m/s
2