Infrared Remote Controle (Included); Assignment Of The Dmx Channels In The Overview - involight SlimPAR1266 Bedienungsanleitung

3.3 Infrared remote controle (included)

The supplied remote control also allows the "SlimPAR1266" to be controlled without a DMX controller and offers
much more possibilities than the functions available via the on-board menu.
Make sure the remote control is pointing directly at the unit and there are no obstructions between the unit and the
remote control.
AUTO mode:
The "AUTO" key puts the unit into automatic mode.
1. Press <AUTO> on the remote control.
2. Press <+> or <-> to switch between the 7 different
Automatic programs.
SOUND Mode:
The <SOUND> key puts the unit into the music-controlled mode.
1. Press <SOUND> on the remote control.
2. Press <+> or <-> to switch between the 7 different
Sound programs.
STROBE Mode:
Press the <STROBE> key to activate the stroboscope in the automatic mode
Or music-controlled operation.
1. Press <STROBE> on the remote control.
2. Press <+> or <-> to switch between the 9 different strobe effects
to choose.
3. Press <STROBE> again to turn off the strobe effect.
SPEED Mode:
Use the <SPEED> button to adjust the speed in the automatic mode
Or music-controlled operation.
1. Press <SPEED> on the remote control.
2. Press <+> or <-> to select between 9 speed levels.
DMX Mode:
Press the <DMX /%> key to move the unit to DMX mode.
MANUAL Mode:
1. Press <MANUAL> on the remote control.
2. Use the R, G, B, W buttons to select the desired colours for the
Flower effect.
3. Press <+> or <-> to switch between the 15 different colour presets
to choose.
SENSITIVITY:
With the SENSIVITY you adjust the microphone sensitivity in the music - controlled
Operation.
1. Press <SENSIVITY> button to select the microphone sensitivity.
2. Press <+> or <-> to switch between the 9 levels
Microphone sensitivity.
UNIT Mode:
1. Press the <UNIT> button on the remote control.
2. Press <1> to enable or disable the laser.
BLACK OUT:
The <BLACK OUT> button turns off all light sources.
1. Press <BLACK OUT> to turn off the light sources,
2. Press <BLACK OUT> again to turn on the light sources.

3.4 Assignment of the DMX channels in the overview:

NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be correctly
operated and programmed with a DMX controller.
2-Channel Mode:
Channel Value
CH1 0-255
0-9
CH2
10-19
Function
Dimmer from 0 – 100%
No Function
Red from 0 – 100%
23