Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DICHIARAZIONE DI CONFORMITA' - DECLARATION OF CONFORMITY
DECLARATION DE CONFORMITE' - KONFORMITÄTS ERKLÄRUNG
Noi - The following - Nous soussignés - Die Unterzeichnete Fa:
dichiariamo sotto la nostra esclusiva responsabilità che il prodotto
hereby declares under full responsability that the following product
attestons sous notre entière responsabilité que le produit suivant
erklärt unter eigener Verantwortung, dass folgende Produkte
LAVASTOVIGLIE - LAVE-VAISSELLE - DISHWASHING MACHINE - GESCHIRRSPÜLMASCHINE
al quale questa dichiarazione si riferisce è conforme alle seguenti norme:
for which this declaration refers to the conformity of the following standards:
auquel se réfère cette déclaration, est conforme aux normes suivantes:
auf welche sich diese Erklärung bezieht, folgendem Standard entsprechen:
Sicurezza degli apparecchi elettrici d'uso domestico e similare - Norme generali EN60335-1(2002) + A1/A11(2004) + A12 (2006) + A2
(2006).
Safety of household and electrical appliances - General requirements EN60335-1(2002) + A1/A11(2004), A12 (2006) + A2 (2006)
Sicurezza degli apparecchi elettrici d'uso domestico e similare - Norme particolari per lavastoviglie per uso collettivo EN60335-2-58
(2005)
Safety of household and electrical appliances - Part 2^
EN60335-2-58 (2005)
Apparecchi elettrici per uso domestico e similare – Campi elettromagnetici – Metodi per la valutazione e la misura EN50366 (2003) + A1
(2006)
Household and similar electrical appliances – Electromagnetic fields – Methods for evaluation and measurements EN50366(2003)
+A1(2006)
Limiti e metodi di misura delle caratteristiche di radiodisturbo degli apparecchi elettrodomestici, e similari a motore o termici, degli utensili
e degli apparecchi elettrici similari. EN 55014 –1(2000) + A1(2001) + A2(2002)
Limits and methods of measurement of radio disturbance characteristics of electrical motor-operated and thermal appliances for
households and similar purposes, electric tools and similar electric apparatus - EN 55014-1(2000) + A1(2001) + A2(2002)
Limiti per le emissioni di corrente armonica (apparecchiature con corrente di ingresso ≤ 16 A per fase) - EN 61000-3-2(2000) + A2
(2005)
Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) - EN 61000-3-2(2000) + A2 (2005)
Limitazione delle fluttuazioni di tensione e dei flicker in sistemi di alimentazione in bassa tensione per apparecchiature con corrente
nominale ≤ 16 A. EN 61000-3-3(1995) +A1(2001)+A2(2005)
Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ≤ 16 A. EN 61000-3-3(1995)
+A1(2001) + A2(2005)
Requisiti di immunità per apparecchi elettrodomestici, utensili e degli apparecchi elettrici similari EN 55014-2(1997)+ A1(2001)
Immunity requirements for household appliances, tools and similar apparatus. Product family standard EN 55014-2(1997) + A1(2001)
Safety of machinery Basic concepts, general principles for design - Basic terminology, methodology-ISO 12100-1 (2003).
Sicurezza del macchinario, Concetti fondamentali, principi generali di progettazione - Terminologia di base, metodologia – EN ISO
12100-1 (2003).
Safety of machinery - Basic concepts, general principles for design - Technical principles-ISO 12100-2 (2003).
Sicurezza del macchinario, Concetti fondamentali, principi generali di progettazione - Specifiche e principi tecnici – EN ISO 12100-2
(2003).
in base a quanto previsto dalle Direttive:
selon ce qui est prévu par les Directives:
on the basis of what is foreseen by the Directives:
aufgrund der vorgesehenen Richtilinien:
Decliniamo ogni responsabilità per sinistri a persone o a cose derivanti da manomissioni da parte di terzi o da carenze di manutenzione o riparazione.
Nous déclinons toute responsabilité pour sinistres à personnes ou à objets qui derivent de l'intervention de la part de tiers non specialistes ou de
carences de manutention ou reparation.
We decline any responsability for injuries or damage derived from machine misuse, abuse by others or improper machine maintenance or repairs.
Wir Iehnen jegliche Verantwortung für Schäden an Personen oder Dingen ab, die auf fehlerhaftes Eingreifen Dritter oder auf mängelhafte Wartung oder
Reparation zurückzuführen.
li 01/01/08
(data/date/Datum)
040F-ek
mod.
Particular requirements for commercial electric dishwashing machines
2006/95/CE, 2004/108/CE, 2006/42/CE.
2006/95/EC, 2004/108/EC, 2006/42/EC.
Il socio amministratore

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für lamber 040F-ek

  • Seite 1 Verantwortung, dass folgende Produkte LAVASTOVIGLIE - LAVE-VAISSELLE - DISHWASHING MACHINE - GESCHIRRSPÜLMASCHINE 040F-ek mod. al quale questa dichiarazione si riferisce è conforme alle seguenti norme: for which this declaration refers to the conformity of the following standards: auquel se réfère cette déclaration, est conforme aux normes suivantes:...
  • Seite 3 The directive mentioned above, to which make reference for further details, provides for punitive actions in case of illegal disposal of such waste. LAMBER, manufacturer of this equipment, is enrolled in the Italian WEEE Register – the Register of Producers of Electrical and Electronic Equipment- from the 18 /02/2008 with the number IT08020000000617.
  • Seite 4 INDICE ITALIANO Note generali pag 05 Introduzione e norme di sicurezza pag. 06 Fate conoscenza con l'apparecchio pag. 10 Parte prima - NORME PER L'UTILIZZATORE pag. 11 Pannello Comandi pag. 12 Funzionamento ed uso, detersivi, manutenzione, inconvenienti possibili pag. 13 Parte seconda - NORME PER L'INSTALLATORE pag.
  • Seite 5: Remarques Generales

    NOTE GENERALI ITALIANO Vi ringraziamo per la scelta da Voi fatta nell'acquisto della Vostra LAVASTOVIGLIE. Il perfetto funzionamento della macchina e risultati di lavaggio ottimali sotto il profilo igienico-sanitario potranno essere garantiti solo se tutte le avvertenze del presente Manuale verranno rispettate. Ci auguriamo che le informazioni contenute nel presente manuale Vi siano di aiuto.
  • Seite 6: Norme Generali Di Sicurezza

    INTRODUZIONE ITALIANO E NORME DI SICUREZZA La macchina 040F-ek è una Lavastoviglie a caricamento frontale di tipo industriale. L'apparecchio è conforme alla Direttiva Europea 89/336/CEE (D.M.13/4/1989), relativa alla soppressione dei disturbi radio. Conformemente alle direttive CEE n.23 del 19/02/1973 ed alla legge di attuazione n.791 del 18/10/1987, le nostre Lavastoviglie sono costruite secondo le normative di buona tecnica vigenti in ITALIA e all'ESTERO.
  • Seite 7: Normes Générales De Sécurité

    INTRODUCTION FRANÇAIS ET NORMES DE SECURITE' L'appareil 040F-ek est une lave-vaisselle industrielle à ouverture frontal. L'appareil est conforme à la Directive Européenne 89/336/CEE , pour ce qui concerne les ennuis de réception. Conformément aux Directives CEE du 19/2/73 et à la Loi de Réalisation n.791 du 18/10/87, nos lave- vaisselle sont construits selon les normes de bonne technique, en vigueur en Italie et à...
  • Seite 8: General Safety Regulations

    AND SAFETY NORMS INTRODUCTION The machine 040F-ek is an Industrial dish-washing machine . The machine is in conformity to the European Norms 89/336/CEE for the radio noises. According to EEC directive no. 23 of 19/02/1973 and the law of actuation no.791 of 18/10/1987, our appliances are built-up according to the good technique notes in force in Italy and abroad.
  • Seite 9: Einführung Und Sichereitsnormen

    DEUTSCH UND SICHEREITSNORMEN EINFÜHRUNG Die maschine 040F-ek ist ein industrieller Frontlader-Geschirrspüler . Die Maschine entspricht der Funkentstörung 89/336/CEE. Gemäß der EWU-Richtlinien Nr. 23 vom 10.02.1973 und des Anwendungsgesetzes Nr. 791 vom 18.10.1987, sind unsere Geschirrspüler nach den gültigen technischen Normen in Italien und im Außland gebaut.
  • Seite 10 Fate conoscenza con l'apparecchio Faites connaissance avec l'appareil Learn to use the appliance Wollen Sie den Apparat kennenlernen Pannello di comando Panneau de contrôle Control panel Pannellatura doppia parete Steuertafel Double paroi Double skin Doppelwandig Filtro aspirazione pompa in acciaio inox Risciacquo superiore rotante in acciaio inox (cono 90°) Filtre aspiration pompe en acier inoxydable Rinçage supérieur rotatif en acier inoxydable (cône 90°)
  • Seite 11: Instructions Pour L'utilisateur

    NORME PER L'UTENTE INSTRUCTIONS POUR L'UTILISATEUR INSTRUCTIONS FOR THE USER BEDIENUNGSANLEITUNG...
  • Seite 12: Kontrollpanel

    PANNELLO COMANDI EMPLOI CONTROLES CONTROL PANEL KONTROLL PANEL Interruttore generale Interrupteur général Main switch Hauptschalter Pulsante selezione tempo lavaggio Bouton sélecteur temps de lavage Wash time selection pushbutton Programmwahlschalter Pulsante ciclo Bouton cycle Cycle pushbutton Programmdrucktaste Lampada ciclo Lampe indicatrice de cycle Cycle lamp Programmkontrollampe Lampada temperatura...
  • Seite 13: Funzionamento Ed Uso

    ITALIANO Parte prima - NORME PER L'UTILIZZATORE FUNZIONAMENTO ED USO La macchina lavastoviglie assicura una produzione oraria di 240 piatti. Il grado di protezione della macchina è IP21 e quindi non deve essere lavata con getti di acqua diretti ad alta pressione.
  • Seite 14 effettuata automaticamente secondo parametri - Estrarre il Cestello inclinandolo, impostati dalla casa costruttrice. scuoterlo leggermente in modo da far In funzione della durezza dell’acqua è tuttavia cadere le gocce residue. possibile modificare la programmazione della Lasciare asciugare evaporazione Rigenerazione. Si veda la tabella relativa nella Stoviglie, quindi toglierle dal Cestello avendo sezione dedicata all’installatore.
  • Seite 15 MANUTENZIONE GIORNALIERA PULIZIA MANUTENZIONE PREVENTIVA Spegnere Macchina premendo l'interruttore "A" e scaricare l'acqua della PRECAUZIONI ED ISTRUZIONI PER Vasca togliendo il Troppopieno; LA PULIZIA Attendere che tutta l'acqua sia defluita e non vi siano detriti sul fondo della vasca; Togliere dall'interno della Macchina i Filtri IMPORTANTE: Prima eseguire...
  • Seite 16 DETERSIVI La scelta del detersivo appropriato è una condizione indispensabile per ottenere ottimali risultati di lavaggio sotto il profilo igienico. E' quindi importante tenere in considerazione alcuni fattori. Innanzi tutto è necessario usare solo Prodotti Antischiumogeni fortemente Alcalini e Cloroattivi specifici per Lavastoviglie industriali, fabbricati da Ditte di riconosciuta serietà.
  • Seite 17: Avant Le Lavage

    FRANÇAIS Première partie - INSTRUCTIONS POUR L'UTILISATEUR FONCTIONNEMENT ET EMPLOI L'appareil lave-vaisselle assure une production horaire de 240 assiettes. L'indice de protection de la machine est IP21. Elle ne doit pas être lavée au jet d'eau directe et à haute pression.
  • Seite 18 CONTROLE DU SEL - Enlever le panier, incliner le et secouer légèrement afin de faire tomber les gouttes A chaque fois qu’il est nécessaire de rajouter du sel restantes. Laisser sécher par évaporation la dans le récipient, la lampe “E” clignote. vaisselle.
  • Seite 19: Entretien Journalier

    ENTRETIEN JOURNALIER NETTOYAGE ENTRETIEN PREVENTIF Mettre hors tension la machine en poussant l'interrupteur "A" faire AVERTISSEMENTS ET écouler l'eau de la cuve en enlevant INSTRUCTIONS DE NETTOYAGE le Trop-plein; Attendre jusqu'à ce que toute l'eau se soit écoulée et qu'il ne reste pas d'ordures sur IMPORTANT: Avant d'effectuer...
  • Seite 20 DETERSIFS Le choix d'un détersif approprié est une condition indispensable pour obtenir des résultats optimaux de lavage sous le profil hygiénique. Il est donc important de tenir compte de quelques facteurs. Tout d'abord, il est nécessaire d'utiliser seulement des produits non-moussants fortement alcalins et chlore-actifs spécifiques pour les lave-vaisselle industriels, fabriqués par des firmes de bonne renommée.
  • Seite 21 ENGLISH First Section - FOR THE USER WORKING AND USE The dishwashing machine can wash up to 240 dishes every hour. The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water. The objects to be washed should be correctly arranged for a good washing-up result. We suggest to descale glasses, from time to time, in order to remove calcareous and/or starchy sediments by soaking them in suitable solutions suggested by your cleansing agent supplier.
  • Seite 22 Unscrew the plug of the salt container at the bottom of the tank and put 1 kg coarse salt tablets in it. Clean the ACHIEVEMENTS gasket and screw the plug. Any deficiency in the washing process is Attention! apparent when dirty residuals are visible. An The lack of salt in the container damages the machine insufficient rinsing might cause any halos: in this because of limestone, besides a defective washing of...
  • Seite 23: Daily Maintenance

    DAILY MAINTENANCE CLEANING PREVENTIVE MAINTENANCE Disconnect the machine with pushbutton "A"; PRECAUTION CLEANING Lift the overflow pipe and let the water INSTRUCTIONS drain out of the tank; Wash thoroughly the tank and the filter housings to remove all impurities; IMPORTANT: Before carrying out the Take the filters out and clean them under cleaning maintenance...
  • Seite 24 CLEANSING AGENTS The choice of a suitable cleansing agent is an essential condition if you want to obtain extremely good washing results as regards hygienic results. That’s why it’s important to consider some points. First of all only highly alkaline and chlorine-active antifoam products, especially made for industrial dish-washing machines, must be used and they must be produced by well-known reliable Firms.
  • Seite 25: Teil 1 - Für Den Benutzer

    DEUTSCH Teil 1 - FÜR DEN BENUTZER ARBEITSWEISE UND ANWENDUNG Die Geschirrspülmaschine erlaubt eine Reinigung von 240 Tellern pro Stunde. Keine alten oder rissigen Geschirrteile verwenden, hier besteht die Gefahr von Bakterienbildung. Bei kalkartiger Ablagerung sollte man von Zeit zu Zeit die Geschirrteile in einer Lösung, die vom Lieferant empfohlen wird, entkalken.
  • Seite 26: Optimale Ergebnisse

    Im fall die Maschine mit einem Wasserentkalker Lassen Sie durch Verdampfung das Geschirr ausgerüstet ist, die Regenerierung Arbeitsgang ist trocknen, d.h. bei Herausnehmen des Korbes Automatisch, nach den eingebenen Parameter die von achten Sie bitte darauf das Geschirr nicht zu Fabrikant Eingestellt wurden.
  • Seite 27: Wartung

    WARTUNG VORSORGLICHE REINIGUNG WARTUNG Die Maschine mit dem Hauptschalter "A" abschalten und das Tankwasser durch VORSICHTSMASSNAHMEN Entfernung des Überlaufrohres ablassen. REINIGUNGSANLEITUNG Abwarten, dass das Wasser vollständig abgelaufen ist, mögliche Abfälle auf dem WICHTIGES: Bevor man jegliche Art von Beckenboden entfernen. Wartung, Reinigung oder...
  • Seite 28: Entkalkung

    REINIGUNGSMITTEL Die richtige Wahl des Reinigungsmittels ist Vorausetzung, um optimale hygienische Ergebnisse zu erreichen. Man muß deshalb einige Faktoren in Betracht ziehen: Es sollten nur stark alkalische Schaumverhindernde Reinigungsmittel mit aktivem Chlor für gewerbliche Geschirrspülmaschinen und von namhaften Herstellern verwendet werden. Die mittlere Konzentration sollte für: - pulverförmigen Reiniger 1,5 ÷...
  • Seite 29: Instructions Pour L'installateur

    NORME PER L’INSTALLATORE Le istruzioni che seguono sono rivolte a personale qualificato, il solo autorizzato ad attuare le verifiche e le eventuali riparazioni. La Ditta declina ogni responsabilità nel caso di interventi effettuati da personale non qualificato e/o utilizzo di ricambi non originali. INSTRUCTIONS POUR L'INSTALLATEUR Les instructions suivantes sont adressées à...
  • Seite 30 INSTALLATION SCHEMA ALLACCIAMENTI INSTALLATIONSBLATT INSTALLATION 040F-ek Altezza massima per scarico a muro - Hauteur maximale pour vidange à mur Maximum height for drain to wall - Maximale Bodenhöhe für Wandwasserablauf Entrata acqua - Chargement eau 3/4" G Water inlet - Wasseranschluß...
  • Seite 31: Collegamento Elettrico

    ITALIANO Parte seconda - NORME PER L'INSTALLATORE Posizionare la macchina in prossimità degli attacchi. In fase di installazione, effettuare un buon livellamento della macchina al fine di consentire un corretto funzionamento della stessa. La Ditta declina ogni responsabilità per gli eventuali danni derivanti dalla mancata osservanza delle norme sotto citate.
  • Seite 32: Alimentazione Idrica

    ALIMENTAZIONE IDRICA E' consigliabile utilizzare solo Addolcitori a "Scambio Ionico" o ad "Osmosi Inversa". I Rispettare rigorosamente Normative procedimenti basati su campi magnetici o Nazionali e Regionali esistenti in materia. radiazioni elettromagnetiche sono del tutto inutili per l'uso specifico in Lavastoviglie. L'impianto idrico deve avere le seguenti caratteristiche: CONDOTTO: Provvedere a portare in...
  • Seite 33 S400-ek-add / S460-ek-add S480-ek-add / S510-ek-add 1 2 3 4 040F-ek-add 2- Impostare poi il dip-switch secondo la tabella seguente in funzione del numero di cicli di lavaggio che si vogliono impostare per avviare la segnalazione dell’operazione di rigenerazione; Conteggio disabilitato...
  • Seite 35: Branchement Electrique

    FRANÇAIS Deuxième partie - INSTRUCTIONS POUR L'INSTALLATEUR Positionner la machine près des attaches. Pendant l'installation, effectuer la mise à niveau de la machine et contrôler à l'aide d'un niveau que la machine soit parfaitement en équilibre. La Maison décline toute responsabilité pour les éventuels dommages dérivants du manque d'observation des normes citées.
  • Seite 36: Branchement Hydraulique

    désincrustation augmenter BRANCHEMENT HYDRAULIQUE concentration de détersif. Respecter rigoureusement normes Il est conseillé d'utiliser seulement des Nationales et Régionales concernantes la adoucisseurs à "échange ionique" à matière. "Osmose inverse": les procédés basés aux champs électriques ou aux radiations L'installation doit avoir les caractéristiques électromagnétiques sont tout à...
  • Seite 37 S400-ek-add / S460-ek-add S480-ek-add / S510-ek-add 1 2 3 4 040F-ek-add 2 - Régler ensuite le dip-switch selon le tableau suivant en fonction du numéro des cycles de lavage désirés pour faire partir la signalation de l’opération de régénération; Conteggio disabilitato...
  • Seite 39: Electrical Connection

    ENGLISH Second Section - FOR THE INSTALLER During installation carry out a good machine levelling, which is a prerequisite for a correct operation thereof. The Manufacturer cannot assume any responsability for any damage to persons or property deriving from the non-observance of the above specified norms. For a correct installation see the drawing on page 30.
  • Seite 40: Water Connections

    WATER CONNECTIONS WORKS TEMPERATURES Carefully comply with any national or Water temperature 55°÷60°C regional regulations in force. Rinse temperature 80°÷85°C Water installation must have the following characteristics: n.b.: To help a correct working of the thermocontrol system, do NOT adjust the thermostat during the washing cycle.
  • Seite 41: Press The Start Button

    S400-ek-add / S460-ek-add S480-ek-add / S510-ek-add 1 2 3 4 040F-ek-add 2 - Then set the dip-switch in accordance with the following table, according to the number of washing cycles you wish to set to start the regeneration operation signaling;...
  • Seite 43: Teil 2 - Für Den Installateur

    DEUTSCH Teil 2 - FÜR DEN INSTALLATEUR Die Maschine in der Nähe der Anschlüsse aufstellen. Während der Installation die Maschine gut ausrichten, um die gute Funktion der Maschine zu gewährleisten. Unsere Firma ist von jeglicher Verantwortung für eventuelle Schäden befreit, die auf Nichtbeachtung nachstehend aufgeführter Normen zurückzuführen sind.
  • Seite 44: Wasserversorgung

    WASSERVERSORGUNG ARBEITSTEMPERATUREN Wassertemperatur 55°÷60°C Hier müssen die jeweiligen Vorschriften der nationalen und regionalen Länder beachtet Spültemperatur 80°÷85°C werden. n.b.: Für eine richtige Arbeitsweise des Temperatur 12°-55°C Thermocontrols, den Thermostat während des Wenn Maschine Betriebs Hauptwasch Zyklus NICHT Kaltwasser angeschlossen wird, verlängert regulieren! sich der Spülvorgang.
  • Seite 45: Zyklus Regenerierung Programmierung

    Karte und speichern Sie die . S400-ek-add / S460-ek-add S480-ek-add / S510-ek-add 1 2 3 4 040F-ek-add 2 - Programmieren Sie den Dip-swicht auf Grund von der folgenden Tabelle, je nach Waschungzyklenanzahl die Sie Programmieren möchten, damit das Signal der Regenierung starten kann. Conteggio disabilitato...
  • Seite 47: Schema Branchements Anschlußschema

    SCHEMA BRANCHEMENTS SCHEMA COLLEGAMENTI CONNECTIONS SCHEME ANSCHLUßSCHEMA Resistenza BOILER - Résistance SURCHAUFFEUR BOILER Elements - BOILERHEIZUNG Marrone - Marron Brown - Braun Blu - Bleu Blue - Blau Ponticelli - Ponts Staples - Brücke Resistenza VASCA - Résistance CUVE TANK Elements - TANKHEIZUNG Marrone - Marron Brown - Braun Blu - Bleu...
  • Seite 48 SCHEMA REGOLAZIONI - SCHEMA REGULATION REGULATION SCHEME - EICHUNG Entrata additivo per risciacquo Entrée du produit de rinçage Rinse aid inlet Nachspülmitteldosiergerät Termostati Lavaggio e Risciacquo Thermostat Lavage et rinçage Wash and rinse thermostat Tankthermostat und Boilerthermostat Dosatore risciacquo Doseur de proudit pour rinçage Rinse-aid dispenser Nachspülmitteldosiergerät Dosatore additivo di risciacquo...
  • Seite 49 SCHEMA ELECTRIQUE SCHEMA ELETTRICO SCHALTSCHEMA WIRING DIAGRAM 230 V 50Hz Fa11 Fa12 Fa14 Fa19 Fa21 Fa7-8 Fa10 P.S. Interruttore generale Interrupteur général Main switch Hauptschalter Finecorsa Microinterrupteur Limit switch Endschalter Resistenza boiler Résistance Surchauffeur Boiler elements Boilerheizung Resistenza vasca Résistance Cuve Tank elements Tankheizung Contattore resistenza boiler...
  • Seite 50: Scheda Elettronica

    SCHEDA ELETTRONICA FICHE ELECTRONIQUE P .C.BOARD ELEKTRONISCHE STEURUNG filo/fil/wire/draht ITA SCARICO VIDANGE DRAIN PUMP ABLAUFPUMPE ETV DEVIATRICE ELECTROVANNE DETOURNANTE SWITCHING VALVE VENTILABLENKUNG VENTIL RIGENERA REGENERATION REGENERATIN ENTKALKUNG POMPA LAVAGGIO POMPE LAVAGE WASHING PUMP WASCHPUMPE RISCIACQUO RINÇAGE RINSING SPÜLUNG FA7-8 FASE PHASE' PHASE PHASE...
  • Seite 51 COMPOSANTS COMPONENTI KOMPONENTEN COMPONENTS SCHEDA ELETTRONICA FICHE ELECTRONIQUE P.C.BOARD ELECTRONISCHE STEURUNG CASSETTA QUADRO COMANDO - CONTROL BOARD - BOITE DE CONTROLE - SCHALTTAFEL TASTIERA A MEMBRANA - PANNEAU A TOUCHES SENSITIVES SOFT TOUCH CONTROL PANEL - MEMBRAN-TASTATUR BASAMENTO - SOCLE - BASE - UNTERBAU Cnp-s400ek...

Inhaltsverzeichnis