Bosch GPO 12 PROFESSIONAL Bedienungsanleitung Seite 8

1 609 929 392 -Buch Seite 1 Dienstag, 19. August 2003 4:49 16
Tool Specifications
Polisher
Order number
Rated input power
Output power
No-load speed
Sanding pad Ø, max.
Grinder spindle thread
Weight without cable, approx.
Protection class
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements
The numbering of the machine elements refers to
the representation of the machine on the graph-
ics page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 On/Off switch
2 Thread for auxiliary handle
3 Hand guard*
4 Auxiliary handle
5 Cup brush*
6 Felt polishing disc*
7 Lambskin polishing bonnet*
8 Polishing sponge*
9 Round nut*
10 Sanding disc*
11 Rubber sanding plate*
12 Protective cap*
13 Fastening screw for protective cap *
14 Clamping nut*
15 Buffing disc*
16 Clamping flange*
17 Clamping mandrel*
18 Grinder spindle
19 Spindle lock button
20 Handle bracket*
21 Thumbwheel for speed preselection
(GPO 12 E)
* Not all of the accessories illustrated or described are
included as standard delivery.
8 • 1 609 929 392 • TMS • 18.08.03
GPO 12
PROFESSIONAL
0 601 366 0..
[W] 1 200
[W] 700
[rpm] 3 000
[mm] 230
M 14
[kg] 3.3
/ II
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 90 dB (A); sound
power level: 103 dB (A).
Wear hearing protection!
The typically weighted acceleration is 5.5 m/s
Intended Use
The machine is intended to polish and brush
metal- and coated surfaces as well as for the pol-
ishing of stone without the use of water.
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
Wear protective glasses and hearing protec-
tion.
Wear additional protection equipment for your
safety, such as protective gloves, sturdy
shoes, hard hat and apron.
The dust that is produced while working can be
detrimental to health, inflammable or explo-
sive. Suitable safety measures are required.
Examples: Some dusts are regarded as carci-
nogenic. Use suitable dust/chip extraction and
wear a dust respirator.
English - 1
GPO 12 E
PROFESSIONAL
0 601 366 7..
1 200
700
750 – 3 000
230
M 14
3.5
/ II
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
2
.