Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Care; Changing The Internal Light; Reversing The Door Swing - Candy COMBI Anleitung

Vorschau ausblenden Andere Handbücher für COMBI:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 90

Cleaning and Care

After defrosting you should clean the Fridge/Freezer internally with a weak solution of bicarbonate
of soda. Then rinse with warm water using a damp sponge or cloth and wipe dry. Wash the baskets
in warm soapy water and ensure they are completely dry before replacing in the Fridge/Freezer.
Condensation will form on the back wall of the Fridge; however it will normally run down the back
wall and into the drain hole behind the salad bin.
The drain hole will have a "cleaning spike" inserted into it. This ensures that small pieces off food
can not enter the drain. After you have cleaned the inside of your Fridge and removed any food
residues from around the whole, use the "cleaning spike" to make sure that there are no blockages.
Use standard furniture polish to clean the Fridge/Freezer exterior. Make sure that the doors are
closed to prevent polish getting on the magnetic door seal or inside.
The grille of the condenser at the back of the Fridge/Freezer and the adjacent components can be
vacuumed using a soft brush attachment.
Do not use harsh cleaners, scouring pads or solvents to clean any part of the Fridge/Freezer.

CHANGING THE INTERNAL LIGHT

1.
Before carrying out the LED replacement always press and turn the thermostat control to dial
to position 0, then disconnecting the mains supply.
2.
Hold and lift up the LED light cover.
3.
Remove the old LED by unscrewing it in an anti-clockwise direction.
4.
Replace with a new LED light by screwing it in a clockwise direction marking sure that it is
secure in the bulb holder.
5.
Refit the light cover and re-connect your Fridge/Freezer to the mains supply and switch on.

REVERSING THE DOOR SWING

To change the opening direction yourself, please follow these instructions:
Tools required: Philips style screwdriver / flat bladed screwdriver / Hexagonal spanner
1.
a. Remove all the cover's screws first.
c. Remove the left hinge cover. Insert the right hinge cover.
b. Lift the top cover away from the Fridge.
40

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis