Reception Problems; Restarting Radio Reception; Light; 12/24-Hour Time Format - Auriol 4-LD4587 Bedienungs- Und Sicherheitshinweise

time signal but will show the adjusted time (1 hour less
for example).

Reception problems

The DCF77 radio control signal is transmitted from a
location near Frankfurt am Main and can be received
at a distance of up to 1500 km. However, there are
some obstacles and sources of interference, which may
substantially hinder reception. If your alarm clock does
not correctly receive the DCF77 radio signal, please
place the alarm clock in a different location at your
site. Please note that devices such as computers,
telephones, radios and televisions may cause
electromagnetic radiation which can interfere with the
DCF77 radio signal reception. Other possible
detriments to reception are: strong building insulation
(metal building materials), nearby mountains or
atmospheric interference. It may also be necessary to
replace the batteries.

Restarting radio reception

Press and hold 13 to restart radio time signal
reception. Please set the time manually if reception fails
(see "Basic settings").
- 11 -

Light

Press SNOOZE/LIGHT 4 on the top of the alarm clock
to briefly activate the light.

12/24-hour time format

Press 15 to select the 12- or 24-hour time format.
In 12-hour time format AM will appear on the display
before noon and PM will appear after noon.

Temperature display

Press 13, to select the temperature unit Celsius
(°C) or Fahrenheit (°F).

Speed setting

Press and hold buttons when setting numerical values
to use the speed setting feature.

Basic settings

The following basic settings can be adjusted: time
zone, hours, minutes, year, month, day and language
of the day of the week display. Press and hold MODE
14 for about 3 seconds in normal time display mode.
The time zone will blink and can be set by pressing
15 or 13. Press MODE 14 to confirm your setting.
- 12 -