Reception Problems; Restart; Manual Time Setting; Lc Display - Auriol 4-LD4537 Bedienungs- Und Sicherheitshinweise

Note: Please do not move the alarm clock during the reception
process.
If the radio time reception attempt is successful, the hands will
automatically move to the correct position and the correct date
will be set. If the reception attempt fails, the clock will restart the
reception attempt hourly and the hands will stay in the reception
position. After 8 failed reception attempts the alarm clock will stop
attempting to receive the signal and the time must be set manually.

Reception problems

The DCF77 radio control signal is transmitted from a location near
Frankfurt am Main and can be received at a distance of up to
1500 km. However, there are some obstacles and sources of
interference, which may substantially hinder reception. If your
alarm clock does not correctly receive the DCF77 radio signal,
please hang or place the alarm clock in a different location at
your site. Please note that devices such as computers, telephones,
radios and televisions may cause electromagnetic radiation which
can interfere with the DCF77 radio signal reception. Other
possible detriments to reception are: strong building insulation
(metal building materials), nearby mountains or atmospheric
interference. It may also be necessary to replace the batteries.

Restart

Press the REC button on the backside of the alarm clock for 4
seconds to restart radio time signal reception. The hands of the
alarm clock will now move to the 12:00:00, 4:00:00 or 8:00:00
- 49 -
o'clock position and stop. The alarm clock will now begin to
receive the DCF 77 radio time signal. If radio time signal
reception is not possible, the time must be set manually.

Manual time setting

If radio time signal reception is not possible, the time can be set
manually:
Press and hold SET for 4 seconds.
•
Press SET briefly to move the hands forward by 1 minute.
•
Press and hold SET to use speed setting.
•
If the SET button is not pressed for 8 or more seconds, the alarm
clock will exit setting mode and the set time will be activated.

LC display

If radio time signal reception is successful, the LC
display will alternate between date, temperature
and seconds every 20 seconds. If radio time signal
reception failed, the temperature will appear
continuously. If the alarm is activated, the bell
symbol will appear.

Light

Press the SNOOZE/LIGHT button on top of the alarm clock to
activate the light briefly.
- 50 -