Setup - Auriol 4-LD4587 Bedienungs- Und Sicherheitshinweise

1 Date - day, month
2 12/24 h, AM/PM
3 Time - hour, minute, second
4 SNOOZE/LIGHT
5
ALARM 1 + 2
6 SNOOZE
Z
Z
7
Radio reception indicator tower
8 Battery level indicator
9
Daylight saving time
10 Temperature
11 Day of the week
12
SET
13
DOWN
14 MODE
15
UP
16
SET

Setup

Open the battery compartment on the back side of the
device and insert two 1.5V AAA R03/LR03 batteries
in the correct polarity. Close the battery compartment.
After inserting the batteries the alarm clock will begin
to receive the time signal and emit a beep. The radio
- 9 -
reception indicator 7 will blink on the display. This
process can take from 3-10 minutes.
Please note: Do not move the alarm clock during the
reception process.
The alarm clock synchronizes the internal clock every
day from 01:00 to 04:00 on each full hour. If
reception is unsuccessful, the clock will reattempt
reception at 05:00 and 06:00. Please set the time
manually, if reception fails (see "Basic settings").
If reception is successful, the radio reception indicator
appears permanently on the display and the time,
date and day of the week are set automatically. During
daylight saving time,
Please note: If you are in a country, in which the clock
displays the wrong time even though it can receive the
time signal, please use the time zone adjustment to use
your alarm clock in a time zone other than the
standard time zone (UTC+1 = Central European Time).
Set the difference in hours (- 01 for example) to the
desired time zone. Restart radio reception after
changing this setting. Your clock receives the DCF77
9 appears on the display.
- 10 -