HQ Power VDP250MHS13/2 Bedienungsanleitung Seite 5

Mode 5: Press the MODE/ESC button until the display shows
mode). Select the desired function using the UP/DOWN buttons. Press the ENTER button to confirm your
selection. The display will show the mode selected previously (DMX or master / slave).
Mode 6: Press the MODE/ESC button until the display shows
desired function using the UP/DOWN buttons. Press the ENTER button to confirm your selection. The
display will show the mode selected previously (DMX or master / slave).
Mode 7: Press the MODE/ESC button until the display shows
Mode 8: Press the MODE/ESC button until the display shows
to reset the default settings.
Detailed DMX Values per Channel
Channel
Channel 1 PAN
Channel 2 16-bit PAN
Channel 3 TILT
Channel 4 16-bit TILT
Channel 5 SPEED
Channel 6 SHUTTER
Channel 7 DIMMER
Channel 8 COLOUR
Channel 9 ROTATING GOBO
Channel 10 GOBO ROTATION
VDP250MHS13/2
Function From
0
0
0
0
0
0
7
15
232
0
0
16
32
48
64
80
96
112
128
192
128
192
0
10
117
118
(positive LED mode) /
(lamp on) /
(reset). Press the ENTER button to reset.
(load default setting). Press the ENTER button
To
255 540°
255 PAN spinner
255 270°
255 TILT spinner
255 PAN / TILT controllable speed with decrease
6 Shutter closed
14 Shutter open
231 Strobe effect with increasing speed
255 Shutter open
255 0 ~ 100% mechanic dimmer
15 White
31 Light blue
47 Red
63 Peachblow
79 Green
95 Yellow
111 Pink
127 Fluorescent
191 Positive rainbow effect with increasing speed
255 Negative rainbow effect with increasing speed
191 Positive rainbow effect with increasing speed
255 Negative rainbow effect with increasing speed
9 Stop
116 Positive rotation with increasing speed
117 Stop
244 Negative rotation with increasing speed
5
(negative LED
(lamp off). Select the
Description
VELLEMAN