Replacing The Wiper Blade - Seiko H2-104S Schnellreferenz

Replacing the wiper blade

The following describes the wiper blade replacement procedure.
Replace the wiper blade when the replacement message appears or scratches are found in the daily inspection. Prepare the
tweezers supplied in the daily maintenance kit before replacing the wiper blade.
1
Open the front cover and wipe cover.
2
Nip the bottom edge of the wiper blade with
tweezers and release the hook of the plastic
projection.
3
Remove the wiper blade upward.
44
4
Nip the rubber of the new wiper blade with the
tweezers and insert it straight downward, and
install it by hooking the hole in the rubber to the
plastic projection.
Note
- When handling the wiper blade, do not touch its upper part by
hand or nip it with tweezers because the upper part directly
contacts with the print head.
Upper part
5
Close the wipe cover and front cover.
Rubber part