Printer Heater Unit; Operation Panel - Seiko H2-104S Schnellreferenz

Printer heater unit

This printer is equipped with three heaters for ink fusing and image quality stabilization.
Supply side
(rear)
Media

Operation panel

The keys, LEDs and LCD are laid on the operation panel of the printer as shown below. In addition, the operation panel is also
equipped with a buzzer function for attention in case an error occurs or an invalid input is entered.
5 Buzzer
3
Power switch
32
Takeup side
(front)
Head
1 2
3
4
LCD Indicates printer status and menus.
OK
2
Keys
Used for menu operation and other
purposes of the printer.
1 Preheater (rear)
Preheats media.
2 Print heater (front)
Penetrates ink into media to fuse the ink.
3 Afterheater (finishing)
Dries ink to stabilize print quality.
- These three heaters are controlled independently.
The temperature of each heater can be controlled from
the operation panel and the host PC (RIP).
WARNING
- Do not touch these heaters to avoid burn as they
become hot.
MENU ONLINE
HEATER CANCEL
1
LEDs
Indicate printer status with ON, OFF,
and blinking.
E
A
B
C
D