Metz MECABLITZ 34 CS-2 Bedienungsanleitung Seite 92

Funcionamiento esclavo sin cable
92
Cordless SLAVE operation
Controllo SLAVE senza cavi
Fig. 10
Fig. 10
Fig. 10
Fig. 11
Fig. 11
Fig. 11
be switched off on the „master" or camera
(refer to the respective operating instructions).
SLAVE flash mode with the mecablitz 34 CS-2:
• Mount the SLAVE flash unit on the supplied stand and
turn on with the main switch .
• Set the SLAVE function selector
flash unit at 2 (fig. 10). The SLAVE indicator
flash (fig. 11).
• On the camera, a mecablitz (e.g. 40 MZ... or 50 MZ-5)
must be mounted which operates as controlling
„master" in the cordless Metz remote mode.
The 34 CD-2 SLAVE can only operate with the con-
troller address 1 (see operating instructions for the
mecablitz mounted on the camera).
This mode is not possible if a 34 CS-2 is mounted as a
„master" on the camera.
• The setting of the operating mode selector
SLAVE 34 CS-2 flash unit is insignificant.
on the SLAVE
will
on the