Metz MECABLITZ 34 CS-2 Bedienungsanleitung Seite 78

Flash di schiarita alla luce diurna
Destellos de aclaración en luz diurna
78
Fill-in flash with dayligh ting lower than the aperture adjusted on the camera. In our
example f/8 was set on the camera. Consequently, we
recommend an aperture of f/5.6 to be set on the flashgun.
Tip:
If the auto-working aperture f/5.6 is not available on the
flash unit because of the adjusted film speed, then the pro-
blem can be overcome in the following manner:
Select an auto-working aperture of f/8 on the mecablitz
and set a shutter speed of 1/30th sec. and f/11 on the
camera.
If an auto-working aperture of f/4 were to be set on the
mecablitz, then a camera aperture of f/5.6 would result in
a shutter speed of 1/125th sec. This would fall short of the
camera's flash synch speed of 1/100th sec.
When shooting into the light ensure that the back-
light does not shine directly onto the sensor as
this will confuse the flashgun's electronics.