Herunterladen Diese Seite drucken

Eaton EASY819-Series Montageanweisung Seite 20

Werbung

EASY410-DC-...
4.5 mm (0.18")
47.5 mm (1.87")
56.5 mm (2.22")
58 mm (2.28")
HAZARDOUS LOCATION – CSA (Canadian Standards Association) Certification
This equipment is suitable for use in CLASS I, DIVISION 2, GROUPS A, B, C AND D
WARNING: "EXPLOSION HAZARD – DO NOT DISCONNECT WHILE CIRCUIT IS LIVE UNLESS AREA IS KNOWN
TO BE NON-HAZARDOUS"
EMPLACEMENTS DANGEREUX – Certification CSA (Canadian Standards Association)
Cet équipement est acceptable pour utilisation dans les EMPLACEMENTS DANGEREUX DE CLASSE I, DIVI-
SION 2, GROUPES A, B, C ET D
AVERTISSEMENT : « RISQUE D'EXPLOSION. NE PAS DÉBRANCHER TANT QUE LE CIRCUIT EST SOUS TEN-
SION, A MOINS QU'IL NE S'AGISSE D'UN EMPLACEMENT NON DANGEREUX »
20/20
Emergency On Call Service: Local representative (Eaton.eu/aftersales) or +49 (0) 180 5 223822 (de, en)
Eaton Industries GmbH, Hein-Moeller-Straße 7-11,
53115 Bonn, Germany
© 2002 by Eaton Industries GmbH,
Eaton.eu/documentation
10.75 mm
50 mm (1.97")
(0.42")
M4
35.75 mm (1.41")
71.5 mm (2.81")
Eaton.com/recycling
02/18 IL05013012Z
All Rights Reserved

Werbung

loading