Aux In Playback; Alarm Setting; Led Light - auna Roadie Smart Bedienungsanleitung

EN
46

AUX IN PLAYBACK

On the main MENU, choose the AUX IN mode and press the enter button.
Using a 3.5mm audio input connection cable (not included), AUX IN allows
for a quick and easy connection to an external sound source.
1. Connect one end of the 3.5mm audio connection cable to the headphone
(or auxiliary out) socket of your secondary device, connect the other end
to the Line in socket on the back of your boombox.
2. Press the Play button on your external device to start playback through
the boombox speakers.
3. To gain optimal volume levels, adjust the output volume level on both
the secondary device and on the Boom box.

ALARM SETTING

Your radio includes dual alarms. Set the alarm, making sure to set the time
first.
1. Press MENU button - Main menu - Alarms, and then press the enter
button to confirm.
2. Press the / buttons to select "Alarm 1" or "Alarm 2", then press the
enter button to confirm.
3. Press the / buttons to select Alarm on, then press the enter button
to confirm.
4. Set the alarm time, sound and repeat as in step 2 above.
5. When the display shows "Alarm Saved", the alarm setting is successful.
or will show on the display.
6. To temporarily switch off the alarm, press the enter button repeatedly to
set the snooze time for 9 minutes in turn. The set snooze time will show
on the display and unit will go to standby.
7. To turn off the alarm, press and hold the enter button when the alarm
sounds.
8. To cancel off the alarm, refer to step 3 to switch the alarm "Off".

LED LIGHT

If the product is powered on, you can switch on the light by pressing the
light button, and you can set 8 different light effects by pressing the light
button.