Before First Use; Unpacking; Battery Operation - auna Roadie Smart Bedienungsanleitung

BEFORE FIRST USE

Unpacking

• Remove all packaging
• Check the presence of all parts and for transportation damage, In case
of damage or incomplete delivery, please contact your dealer.
• Please keep the packaging. The appliance can be stored if it is not used
for a longer period of time.
• Place the appliance on a level, stable, clean and dry surface.
• Ensure that there is sufficient ventilation. Keep a minimum distance of
10 cm between the product and other objects or walls.
Mains operation
• The appliance can either be powered through a wall outlet or by
batteries.
• Insert the power cable into the AC IN~ inlet at the back of the appliance.
Connect the power plug to a suitable wall outlet. Make sure that the
power supply voltage is the same as needed for the appliance.

Battery operation

• Disconnect the power plug from the wall outlet before opening the
battery compartment and inserting batteries.
• Open the battery compartment at the backside of the appliance.
• Insert 8 batteries (1.5 V, battery type LR14 / R14 / C) (not supplied)
according to the polarity markings inside the battery compartment and
on the batteries.
• Use batteries of high quality only, Batteries of low quality might leak
and cause damage.
• Do not use new and old batteries together. Close the battery
compartment lid after inserting the batteries.
Important:
• Do not use the appliance with a wall outlet and batteries at the same
time. Remove batteries before connecting the appliance to mains
power.
• If you will not use the appliance for a longer period of time, disconnect
the power plug and remove all batteries.
EN
35