Fast Tape Winding; Connecting External Sources (Games Consoles, Dvd Players And Television Receivers); Connecting A Games Console/Dvd Player To The Tev-501; Connecting An External Monitor - Blaupunkt TEV-501 Bedienungs- Und Einbauanleitung

Fast tape winding

To fast forward the tape,
Press the FFWD button.
To fast rewind the tape,
Press the REW button.
Connecting external sources
(games consoles, DVD players
and television receivers)
You can connect up to two external
video and audio sources to the TEV-501
(e.g. a games console or DVD player),
and use the monitor and loudspeakers
for the output. The TEV-501 has two
separate inputs for video signals and
stereo audio signals. The inputs are
located on the front and back of the TEV-
501. If all the inputs are in use, the TEV-
501 gives priority to the inputs at the
front of the unit.
Connecting a games console/DVD
player to the TEV-501
Use a suitable cable to connect a
games console/DVD player to the
VIDEO IN, AUDIO IN L and
AUDIO IN R inputs at the front or
back of the TEV-501.
To avoid damage to the TEV-501
and the games console, make
absolutely certain that the cable
colours match the jack colours on the
units.
OPERATING THE TEV-501
First switch on the games console.
Now switch on the TEV-501.
To enable an external source to output
on the TEV-501,
Press the STOP button.

Connecting an external monitor

You can connect a monitor to the TEV-
501 in order to output to this monitor.
Connect an external monitor or
television to the AV OUT
connection on the TEV-501.
Connecting a television receiver
to the TEV-501
There is a 32-pin connection at the back
of the TEV-501 to allow you to connect
the optionally
television receiver. If you want to
purchase a television receiver for the
TEV-501, please contact a Blaupunkt
dealer.

Headphone connection

There are two 3.5 mm headphone
connections at the front of the TEV-501
labelled HEADPHONE
HEADPHONE 2. You can connect
headphones to either of these jacks. If
you connect a headphone to the
HEADPHONE 1 jack, the unit's internal
loudspeakers will be deactivated. If you
only connect up the HEADPHONE 2
jack, sound will
simultaneously over the internal
loudspeakers.
available TET-01
1 and
be outputted
19 19