Securing And Installing The Tev-501; Before Using For The First Time - Blaupunkt TEV-501 Bedienungs- Und Einbauanleitung

SECURING AND INSTALLING THE TEV-501

Securing and installing
the TEV-501

Before using for the first time

Open the lower storage
compartment of the TEV-501's
case, and remove the cigarette
lighter adapter and the four straps.
Close the lower storage
compartment.
Remove the unit from its case.
Thread the adapter cable through
the opening in the case.
Connect the plug to the DC 12V
input of the TEV-501.
Place the unit back into the case.
Secure the TEV-501 using the
Velcro straps located inside the
case by threading the Velcro straps
through the eyelets on the side of
the unit.
16
DC 12V