Operating The Tev-501 In Buildings; Operating The Tev-501; Switching The Tev-501 On/Off; Playing A Video Cassette - Blaupunkt TEV-501 Bedienungs- Und Einbauanleitung

OPERATING THE TEV-501

Repeat this procedure for the
passenger seat.
Open the case's upper lid.
Flip up the monitor.
Open the zip fasteners at the front
of the case. The unit is angled at
around 15°. Close the zip fasteners
until the unit is set at an angle that
you find convenient.
Operating the TEV-501 in
buildings
Place the unit on a secure and
level surface.
Open the lower storage
compartment in the TEV-501's
case, and remove the power
supply unit.
Connect the output of the power
supply unit to the DC 12V input of
the TEV-501.
Connect the mains power cable to
a 220-volt socket.
18
Operating the TEV-501

Switching the TEV-501 on/off

Press the POWER button to switch
the TEV-501 on/off.

Playing a video cassette

Note
The TEV-501 is designed to play
standard consumer video cassettes of
the VHS variety (Video Home System).
Never try inserting other cassettes other
than VHS cassettes into the TEV-501.
Suitable VHS video cassettes are
labelled with the VHS symbol. Blau-
punkt-Werke cannot accept any liability
for damage that may occur from using
other video cassettes in this unit.

Inserting a video cassette

Carefully insert a video cassette
with its printed side uppermost and
its flap side first into the cassette
compartment of the TEV-501.

Removing a video cassette

With playback stopped, press the
STOP/EJECT button.
Playing a video cassette
To begin playback, press the PLAY
button.
Note
Video cassettes will be played
automatically if their recording protection
mechanism has been activated.