Scansonic I101 BT Bedienungsanleitung Seite 18

a very high degree of accuracy in the Tuner's clock� You can
change to use other time server by inputting the URL address
(see below NTP server). You can choose "Do not use network
time" if you don't want it to� If you choose not to use NTP for
clock synchronization, highlight the NTP (Network time protocal)
and press OK to make the change� You will see the Set Date &
Time appeared on the menu� Select it and adjust the date and
time as you desire�
• NTP Server
NTP is designed to synchronize a device's clock with a time
server� Here it shows the server being used for the tuner�
Language
The default language is English, you can choose other languages
as preferred. Scroll with the ▲▼ buttons on remote to the item with
h a and press OK. Scroll to highlight and press OK to select your
language of choice� English, French, Spanish, Italian, German,
Dutch, Polish, Russian and Simplified Chinese are available.
Local Radio
The radio is set by default to detect the radio stations in your local
area automatically through internet connection and these stations
can be accessed by a press of [Local] button on remote� You can
also set Local in another region if you want� Highlight the Local
Radio and press OK� Choose Manual-set Local radio to change
the region setting�
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible
streaming: Repeat All, Repeat Once or Shuffle.
18
I101 BT