Alarm Setting - Scansonic I101 BT Bedienungsanleitung

• Use the up/down button to select the operating mode Bluetooth
and press OK�
• Switch your Bluetooth device to which you want to connect the
radio on and activate the pairing mode here� The device scans
for Bluetooth devices in the reception range�
• When the radio is found, your bluetooth device shows its name
I101BT-XXXX (the XXXX is an identification code for your radio unit).
• Select the radio at your bluetooth device�
• Start playback on your bluetooth device�
• Playback now takes place using the radio�

7. ALARM SETTING

• Choose Alarm from the main menu or press the [Alarm] button
on the remote control�
• Select either Alarm 1 or Alarm 2, choose Turn on to activate the
Alarm�
• Follow the alarm wizard instructions to set the alarm�
• The wizard will guide you through the settings below:
Time - Set the time for the alarm
Sound - You can choose Wake to Tone or My Favourite as the
alarm source� Wake to My Favourite - Please preset your favorite
station before setting this as the alarm source�
Repeat -You can schedule the alarm as you desire - Everyday,
Once or multiple days�
Alarm Volume - Adjust the volume of the alarm as you like by
pressing [▲/▼] button on remote.
• After the above settings are completed, press the [◄] button
to exit and make sure the Alarm is turned on� You will see the
Alarm icon appeared on the display if it is activated�
14
I101 BT