Scansonic I101 BT Bedienungsanleitung Seite 16

• IP
The IP is set Dynamic by default� Select to change Fixed IP
according to your network condition�
• DNS
The DNS is set Dynamic by default� Select to change <Fixed>
DNS according to your network condition�
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country�
There may be variation between different countries� Therefore it
is necessary to choose the Wi-Fi channels to ensure the Wi-Fi
performs satisfactory� We have already set the channels according
to the requirement in different countries� Choose the country you
are staying from the list to get the correct channel� The Europe/
United Kingdom is set by default, press [OK] on the Remote
control to edit the country selection�
LAN Network
Connect the Tuner's Ethernet port to one of the LAN ports in a
router or Wi-Fi router using CAT 5 or CAT 6 cable� If your Router
or Wi-Fi router is DHCP-enabled (recommended), you don't have
anything to setup and the Tuner will connect to Internet with the
parameters automatically assigned by the Router/Wi-Fi router�
Use the remote control for configuration if you want to use a fixed
IP, scroll to IP: [Dynamic] and press OK� Choose Fixed� Press the
▲ button, you can then enter the IP, press ▲, ▼ to tune to the
required numbers: xxx�xxx�xxx�xxx� Switch among the 4 groups by
pressing ◄►. When done, press OK. Scroll to GW and NM to do
the same�
16
I101 BT