Additional Components For A 302/2 And A 302/3; Disposal Of The Packing Material - Miele professional A 300/2 Gebrauchsanweisung

en - Items supplied
30

Additional components for A 302/2 and A 302/3

– A 802 rinse nozzle for powder dispenser
– A 844, injector nozzle with plastic support, for load items with an
opening width of 6 to 55 mm, length 80 mm, Ø 2.5 mm
– A 845, injector nozzle with plastic support, for load items with an
opening width of 6 to 55 mm, length 125 mm, Ø 2.5 mm
Nozzles with different diameters can be fitted on the modules as
required.
However, the different diameters will affect the wash pressure and
hence the cleaning performance.
Please speak to the Miele Customer Service Department if you
wish to use nozzles with different diameters.
– A 862, holding rack with coating for the A 302/2 and
A 302/3 modules
Further components are available from Miele as optional extras.

Disposal of the packing material

The packaging is designed to protect against transportation damage.
The packaging materials used are selected from materials which are
environmentally friendly for disposal and should be recycled.
Recycling the packaging reduces the use of raw materials in the
manufacturing process and also reduces the amount of waste in
landfill sites.