Additional Components For A 300/2 And A 300/3 - Miele professional A 300/2 Gebrauchsanweisung

en - Items supplied
26

Additional components for A 300/2 and A 300/3

– A 802 rinse nozzle for powder dispenser
– A 840, injector nozzle with plastic support, for load items with an
opening width of 12 to 85 mm, length 130 mm, Ø 6 mm
– A 841, injector nozzle with plastic support, for load items with an
opening width of 12 to 85 mm, length 210 mm, Ø 6 mm
Nozzles with different diameters can be fitted on the modules as
required.
However, the different diameters will affect the wash pressure and
hence the cleaning performance.
Please speak to the Miele Customer Service Department if you
wish to use nozzles with different diameters.
– A 860, holding rack with centring aids for the A 300/2 and
A 300/3 modules
Further components are available from Miele as optional extras.