Cylinder Pressure Regulator Installation - AtriCure CRYO1 Installationsanweisungen

5. Cylinder Pressure Regulator Installation

Confirm that all items listed above are in the Cylinder Pressure Regulator Kit.
1. The Cylinder Pressure Regulator will be installed on System II of the CCS–200
console. Refer to figure below to identify System I and System II Probe Socket
Supply Connectors.
Item
1.
2.
3.
Cylinder Pressure Regulator Kit
Description
Pressure Regulator (with rubber boots)
Band-Clamp (with screws)
5/64" Allen Wrench
6 of 70
Quantity
1
1
1