Return Of Product; Disclaimer Statements - AtriCure CRYO1 Installationsanweisungen

8. Return of Product

If for any reason this product must be returned to AtriCure, Inc., a return goods
authorization (RGA) number is required from AtriCure, Inc., prior to shipping.
CAUTION: It is the responsibility of the health care institution to adequately
prepare and identify the product for shipment.
If the product has been in contact with blood or body fluids, it must be
thoroughly cleaned and disinfected before packing. It should be shipped in
either the original carton or an equivalent carton, to prevent damage during
shipment; and it should be properly labeled with an RGA number and an
indication of the bio-hazardous nature of the contents of shipment.
Instructions for cleaning and materials, including appropriate shipping
containers, proper labeling, and an RGA number may be obtained from
AtriCure, Inc.

9. Disclaimer Statements

Users must assume responsibility for approving the condition of the installation
before it is used. AtriCure, Inc., cannot be held liable for any consequential
damage, personal injury or damage to property caused by improperly installed
products.
Users must assume responsibility for approving the condition of the installation
before it is used. AtriCure, Inc., cannot be held liable for any consequential
damage, personal injury or damage to property caused by improperly installed
products.
This document describes the proper procedures for the product installation. Any
deviation from these procedures, which may compromise the function of the
product, is the responsibility of the user.
10 of 70