Motorola PMLN5393 Handbuch Seite 10

68012005011.book Page 8 Wednesday, March 9, 2016 1:29 PM
LED
Indication
Battery voltage is too low
for the Normal Charge.
Blinking
Yellow
Battery temperature is too
warm or too cold to
charge.
Charger shuts off to
prevent overheating of
battery.
Blinking Red
(4 Hz)
Poor connection between
the Desktop Charging
Tray and battery contacts.
No input power.
LED Off
Incorrect battery used for
charging.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks
or registered trademarks of Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their respective owners.
© 2008, 2015, 2016 Motorola Solutions, Inc. All rights reserved.
Table 3: Troubleshooting
Reason
Wait until the battery voltage
reaches the value that allows the
charger's Normal Charge Mode.
Charge battery within
recommended temperature
range: 5 – 40 °C.
Allow battery to cool down
(approximately 30 mins) to
5 – 40 °C. Unplug and reconnect
power to charger input.
Remove input power, clean
contacts and reinsert battery.
Check the power supply
connection to the wall electric
outlet or try different wall plug.
Charge recommended battery
only. (See Table 1).
8
Solution