Inhaltsverzeichnis; Introduction; Symbols On The Product - Husqvarna CL400 Bedienungsanweisung

Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 5
Operation........................................................................ 7

Symbols on the product

Symbols are used on the product to give some
information or indicate warnings. Pay attention to these
symbols to avoid danger.
This product is in accordance with EC
directives.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Wear the personal protection equipment.
2
Contents
Maintenance................................................................. 11
Troubleshooting............................................................ 12
Technical data.............................................................. 14
EC Declaration of Conformity....................................... 14

Introduction

Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
The fuel is highly flammable. Handle the fuel
with particular care and caution. Do not fill
the fuel tank when the engine is in
operation, or someone is smoking, or in the
presence of flames or spark.
The product can eject gravel, grass or other
objects when it is in operation.
Make sure that persons or animals keep a
distance of a minimum of 20 m during work
DANGER - Keep hands or feet away from
the rotary cutting component on the product.
Do not work on the product when the engine
is in operation.
1394 - 002 - 27.11.2019