Nice To-Max Anweisungen Und Hinweise Für Die Installation Und Die Bedienung Seite 7

• Fitting the wall-mounted control switch
Install a control switch on the wall, taking care to observe the following:
– position the switch in a location visible from the shutter but far from moving
parts.
– position the switch to the side of the shutter, in the same location as the elec-
tric cable of the tubular motor and the power cable connected to the mains.
– position the switch at a minimum height of 1.5 m from the ground.
3
a1
b1
4
c1
d1
[D]
[A]
[B]
[A]
[C]
5
[A]
6
C -
[C]
[A]
7
[E]
C - E
E
e1
[E]
C - E
English – 7