Specifications - Ingersoll-Rand 212 Gebrauchsanweisung

LUBRICATION
Ingersoll- - Rand No. 50
Always use of an air line lubricator with these tools.
We recommend the following Filter- - Lubricator- - Regulator
Unit:
For International- - No. C28- - C4- - FKG0
For USA- - No. C28- - 04- - FKG0- - 28
After each eight hours of operation, unless an air line
lubricator is used, inject 1.5 cc of Ingersoll- - Rand
No. 50 Oil into the inlet of the tool and run the tool
briefly.
After each forty- - eight hours of operation, or as
experience indicates, inject about 3 cc of Ingersoll- - Rand
No. 100 Grease into the Grease Fitting (19A, 31).
Model Type of
Handle
212, pistol
212- - EU
Tested in accordance with ANSI S5.1- - 1971 at free speed
H
♦ Tested to ISO8662- - 1 loaded with frictionbrake to 9 RPM
ISO3744
•
PLACING TOOL IN SERVICE
Ingersoll- - Rand No. 100

SPECIFICATIONS

Drive Impacts
per min.
in.
3/8" sq. dr., 1,500
ring- - type
retainer
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
Recommended
Torque Range
ft- - lbs (Nm) Pressure
20- - 125 (27- - 170) 97.5
3
FILTER
COMPRESSOR
(Dwg. TPD905- -1)
HSound Level
♦Vibrations
dB (A)
•Power
110.5
Level
2
m/s
2.7