Eyecup Adjustment; Focus Adjustment; Specifications - Bushnell 180825 Anleitung

EYECUP ADJUSTMENT

Your Bushnell Image Stabilized Monocular is fitted with a twist-up eyecup designed for your viewing comfort and to prevent
glare from the sun or other bright light sources. For users without eyeglasses, twist the eyecup up, rotating the eyecup
counter-clockwise until it locks into the fully "up" position. If you wear glasses, make sure the eyecup is in the down position-
this will bring your eye closer to the ocular lens, allowing you to see the full field of view. To lower the eyecup from the full
"up" position, rotate it clockwise.

FOCUS ADJUSTMENT

The focus ring is located at the front of the eyepiece (ocular lens) of the monocular. Focusing is achieved by simply turning this
ring while viewing through the eyepiece, until a sharp image has been achieved. This will be easier if the image stabilization
feature switch is turned on, to avoid blur due to hand held motion or vibration.
Objective
Lens
Strap
Attachment Lug
4
Stabilization
Battery Status
On/Off Switch
Indicator (green LED)
Focus Ring
Twist-Up
Eyepiece
Battery Cover

SPECIFICATIONS

• Magnification: 8x
• Objective Lens Diameter: 25mm
• Field of View: 393 ft. @1000 yards /
131m @1000 meters
• Total Eye Relief: 15mm
• Exit Pupil: 3.1 mm
• Length: 5.3 in / 134.6 mm
• Weight: 14 oz / 397 g
• Power Source: Two CR2 3-volt
lithium batteries (included)