Operation; Operation Instructions; Cold Start; Warm Start - Zipper ZI-GPS182J Betriebsanleitung

13

OPERATION

Machine to be operated in a perfect state only. Inspect the device visually every time it is to be
used. Check in particular the safety equipment, electrical controls, electric cables and screwed
connection for damage and if tightened properly. Replace any damaged parts before operating the
device.

13.1 Operation instructions

 Shut off the machine and let it cool down before start any cleaning, upkeep, checks or
maintenance!
 Operate the machine always with belt!
 In dangerous situations detach the machine with the quick release from shoulder strap
 Make sure the fuel and tank are in perfect condition before each start!
 Before using practice all working techniques with the engine stopped.
13.2 Operation

13.2.1 Cold start

Always pull the starter pull cord straight out. Hold the handle of the starter pull cord firmly
when the starter pull cord retracts. Do not allow the starter pull cord to whip back.
1.) Fill the fuel tank (13) with the right fuel.
2.) Press the primer (15) 6 x times.
3.) Switch the ON-OFF switch (2) to „I".
4.) Pull the choke lever (11) to position „
5.) Hold the appliance firmly and pull out the starter pull cord (12) to the point of first resistance.
Now pull hard on the starter pull cord (12). The machine starts.
6.) If the engine does not start, repeat steps 4–5.
7.) As soon as the engine is running, press the safety lock-out (1) and then press the throttle (9),
to activate the automatic choke.

13.2.2 Warm start

1.) Switch the ON-OFF switch (2) to „I".
2.) The choke lever (11) does not need to be pulled out to start a warm motor.
3.) Hold the appliance firmly and pull out the starter pull cord (12) to the point of first resistance.
Now pull hard on the starter pull cord (12). The machine should start after 1-2 pulls. If the
machine still hasn't started after 6 pulls, repeat steps 1–7 under "Cold start".
ZIPPER MASCHINEN GmbH
ZI-GPS182J
www.Zipper-Maschinen.at
NOTICE
WARNING
".
OPERATION
36