17 6.4 Recovery Process; 17 6.5 Spare And Wearing Parts - Bosch DCU 220 Betriebsanleitung

en 26 | DCU 220 | Maintenance
6.4 Recovery process
i
If the preset Win 10 settings are to be restored, start
the recovery process.
!
All of the data and applications on your hard disk are
deleted during the recovery process!
1. Connect the DCU 220 to the power supply unit.
2. Switch on the DCU 220.
3. If the following screen appears while the system
is starting, hold down the keys Ctrl + Alt + F2 for
4 seconds.
!
If DCU 220 does not open the recovery menu,
DCU 220 must be shut down with the <Shift
pressed and the recovery process must be restarted.
4. To start the recovery, select <Recovery> in the
screen which appears.
i
The progress bar shows the percentage of com-
pleted recovery. During the recovery process, the
progress bar reaches the 100 % multiple times. After
the process is finished, the system turns off.
|
1 689 989 321 2019-06-04
5. Turn the DCU 220 on.
 The windows Setup Wizard starts.
6. Follow the instructions on the screen.
i
When the system restarts, the installation screen ap-
pears. The installation program identifies the system
hardware and installs the drivers.
"
After installation is over, the system restarts and the
Windows desktop appears.
6.5 Spare and wearing parts
Designation
DCU 220 tablet PC
> key Carrying handle
Storage battery (1 unit)
Hard disc (256 GB)
Hard disc (512 GB)
Case
External DVD drive
USB connecting cable (Y)
Power supply unit
German power supply cable
Stylus (3 unit)
<)
depending on the variant
1)
wearing part
<)
Order number
-
1 684 736 024
1 687 335 047
<)
1 687 370 326
1)
1 687 370 327
1)
1 685 438 656
1 687 023 773
<)
1 684 465 688
<)
1 687 023 775
1 684 461 186
1 683 083 013
Robert Bosch GmbH