Change Of Hinge Side - Wfg32 - Vestfrost WFG32 Bedienungsanleitung

Change of hinge side - WFG32

The door can be changed from right-hinged to left-hinged and vice versa as follows:
fig. 7.1
fig. 7.4
1. Screws 2. Door axis
6. Lower hinge 7. Top hinge - right 8. Hole cover
Ensure that the cabinet is not connected
to the mains and place the cabinet on
the back. SUPPORT THE DOOR !
● 1. Open the door to a 90 degree angle,
take out the 2 screws (1) from door axis
(2), remove the door (4), Remove the
Door axis (2) (Fig. 7.1-2).
● 2. Unscrew the screw located underneath
the door frame and the limit device (3),
and re locate it at left end side of the
door frame. (Fig. 7.2)
● 3. Take out the 3 hinge screws from the
top hinge (right) (7) and remove it. (Fig.
7.3)
fig. 7.2
fig. 7.3
3. Door limit device
● 4. Remove decorative nail (8) from left
top of cabinet and install spare top hinge
(Left) (9) at left top of cabinet with 3
screws. (Fig. 7.3)
● 5. Overturned the lower hinge(6). Install
the lower hinge at left lower of the cabinet
with 3 screws(5).(Fig. 7.4)
● 6. The door axis(2) revolves 180 degree,
Put it into the door axis hole of the door.
(Fig. 7.4)
● 7. Install and aligned the door. Screw
down the 2 screws(1). (Fig. 7.4)
● 8. Insert the plastic caps to cover the
holes(8).
11
4. Door 5. Hinge Screws
9. Top hinge - left
GB