Change Of Hinge Side - Vestfrost CVKS 670 Bedienungsanleitung

Change of hinge side
1) Dismantle the top hinge. The hinge is to
be used later as top hinge at the
opposite side. Lift off the door..
2) (For too doors) Dismantle the middle
hinge. Lift off the bottom door.
Mount the hinge screws
again.
3) (For too doors) On appliances with a
door closer on the upper door, this door
closer should be
removed and remounted
on the opposite side.
4) (For too doors) Dismantle the screws in
the middle of the new hinge
side. Mount the bottom door
and screw on the
middle hinge.
5) Remove the kick plate. The bottom hinge
is dismounted at the 3 screws. The hinge is
turned 180° and mounted on the opposite
side.
6) Adjusting the bottom door: Loosen the
3 screws in the bottom hinge and push
the bottom hinge to the required side.
Tighten the screws and mount the kick
plate
The kick plate.
7) Ajustment of the top door:
loosen the screws in the hinge
above the door, loosen the hinge
above the door and turn
the hinge to the wanted
side. Tighten the screws.
8) Move the handle.
7
GB