Jabra SP200 Handbuch Seite 2

Later pairing:
- Turn the speakerphone on.
- Press and hold the answer/end button (approximately 5 seconds)
until blue light flashes rapidly.
- Activate Bluetooth on your phone.
- Search for Bluetooth devices and select Jabra SP200.
- Press "OK" on the phone and confirm with PIN code 0000 (4 zeros).
5 USING YOUR JABRA SP200
Answer a call
- Tap the answer/end button on your speakerphone to answer a call.
End a call
- Tap the answer/end button on your speakerphone to end an active
call.
Make a call
- The call will automatically transfer to your speakerphone*. If not tap
the answer/end button.
Reject a call*
- Press (approximately 2 seconds) the answer/end button.
* Phone dependent
81-02938_RevA_SP200_QSM_EMEA_content.indd 2 2009-3-19 9:22:10